Shine 2 is powered by a 3 Volt CR2032 coin cell battery (included). Only replace the battery in the Shine 2 with a CR2032 battery type. It lasts about 4 to 6 months with normal use. We recommend using the same brand (or one with equivalent quality), which should give you the estimated battery life.
Sync your Shine 2 to the Misfit App. In the app, tap “Devices” to see a list of your devices. Each device listed will display a battery icon, indicating the estimated remaining battery power.
1. Twist open the shine 2 body using the Battery Door Tool
Place Shine 2 in your palm with the back facing up towards you. Connect the Battery Door Tool to the back, battery door, of the Shine 2. Press down firmly and rotate the Battery Door Tool to the left. If you do not have a Battery Door Tool, please refer to the section below “How to Open Shine 2 Without a Battery Door Tool”.
2. Remove the shine 2 battery door
3. Remove the used battery
Remove the used battery and properly dispose of the used battery.
4. Place a new CR2032 battery in the Shine 2
The positive (+) side of the battery faces down into the Shine 2 and the negative (-) faces outwards. The negative (-) face of the battery should be visible when placed into the Shine 2.
5. Place the battery door back onto the Shine 2
Place Shine 2 in your palm and put the battery door onto the back of the Shine 2. Make sure the indent above the Misfit logo on the battery door aligns with the small silver screw inside the Shine 2.
6. Close the Shine 2 body using the Battery Door Tool
Connect the Battery Door Tool to the back, battery door, of the Shine 2. Press down firmly and rotate the Battery Door Tool to the right until the battery door will not rotate anymore. The Shine 2 will vibrate when closed. If you do not have a Battery Door Tool, please refer to the section below “How to Close Shine 2 Without a Battery Door Tool”.
HOW TO OPEN SHINE 2 WITHOUT A BATTERY DOOR TOOL
Place Shine 2 in your palm with the back facing up towards you. Place your other palm over the back of the Shine 2, making good contact with both sides of the Shine 2. Press Shine 2 firmly in-between your palms and rotate to the left. You should feel the battery door twist to the left. If the battery door doesn’t automatically pop off, then separate the battery door from the back of the Shine 2.
HOW TO CLOSE SHINE 2 WITHOUT A BATTERY DOOR TOOL
Place Shine 2 in your palm and put the battery door onto the back of the Shine 2. Make sure the indent above the Misfit logo on the battery door aligns with the small silver screw inside the Shine 2. Place your other palm over the back of the Shine 2, making good contact with both sides of the Shine 2. Press Shine 2 firmly in-between your palms and rotate to the right until the battery door will not rotate anymore. The Shine 2 will vibrate when closed.
Comments
0 comments
Article is closed for comments.