You can easily remove or install metal bracelets by using the quick-release spring bar on the back of the bracelet. 20mm metal bracelets are compatible with Command and Vapor. They WILL NOT work on Phase.
Bracelet must be worn tight in order to get accurate heart rate measurements on Vapor. Links can be easily removed at any local jeweler to ensure a tight fit.
To install a metal bracelet:
|Undo clasp by holding down two side pushers to release.||Turn device and bracelet face down and align bracelet to the top of the device.||Place the end of the spring bar opposite the easy-release pin into the hole on the lug.||Push the easy-release pin in to compress the spring bar and align other end with the hole on the opposite lug and release to secure.|
|Curve bracelet over the back of the device and repeat on the other side.|
To remove a metal bracelet:
|Turn watch over to expose back of bracelet.||Press easy-release pin inward to compress the spring bar||and pull outward to release bracelet.||Repeat on other side.|
*If switching to another type of strap follow instructions for installing spring bars. Spare spring bars are available in the pocket of packaging of most devices that come on a bracelet. For extras please contact customer service.